罗基德·麦克斯·节点片 - 桥梁风格

Rokid Max Node Piece - Bridge Style

2023-06-01 08:42:06

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

摘要

包括我自己在内的一些 Rokid Max 用户都遇到过图像底部被截断的问题，因为附带的鼻杆无法让眼镜在脸上的位置足够低。这款替换鼻托的设计可以帮助缓解这一问题。

请注意，我以前曾发布过 Rokid Max 的另一种替换鼻梁片。这里 . While that nose piece workes fine to get the full image from the Rokid Max in view, I found that it also has a tendency to shift on my nose over time. We're talking very tiny shifts 这里, but with these glasses the tolerance on the sweet spot is so small that it doesn't take much movement before the top or bottom edge, or one of the corners start to subtly creep out of view.

In addition to being much more robust, as t这里 are no thin parts that are likely to break over time, I've also found this design to be much more stable when it comes to the glasses staying w这里 you put them on your face. Hence, once the sweet spot is centered, it tends to stay centered. I find this design to be about as comfortable as the 其他设计, though comfort is a very subjective thing. Between this design and the 其他设计 I recommend trying this one first, and if it doesn't work for you, try the 其他设计 .

STL 文件本身是打印平的，然后需要在杆上弯曲一个小角度。这可以通过在热水中冲洗或在一盆热水中浸泡来实现，使其稍稍变软，然后使用尖嘴钳将杆稍稍向前弯曲。安装后，鼻托前缘的角度应与镜头外壳前侧的角度相同。

您需要用珠宝锉刀和/或砂纸将边缘打磨光滑，这样在按压鼻子时就感觉不到边缘了。

虽然没有严格要求，但我还是强烈建议涂塑 to the front surface of the nose piece. This further softens the support, and also helps prevent slippage. I used the dip-style of 涂塑, and while that worked fine, my finish is a bit un-even. I feel that several coats with the spray style of 涂塑 will likely give better results.

总之，每个人的鼻子都不一样，所以可能会有差异。