Zelda TOTK 超级手 LED
Zelda TOTK UltraHand LED
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
https://youtu.be/DNyDilNJeho
You can build a prop replica of Link’s Ultra Hand from The Legend of Zelda, Tears of the Kingdom.
Guide: https://learn.adafruit.com/ultrahand
We were inspired by Link’s new ability to make a 3d printed prop that uses LED noodles.
It’s a two piece wearable that fits over your arm and the palm of your hand.
The LEDs wrap around the arm band to resemble abilities effect like in the game.
LED noodles are a flexible strand of tiny LEDs that can be powered by a 3V coin cell battery.
We made two different sizes to fit both adult sized Hylians and smaller players alike.
Get the parts to build your own Ultra Hand from the adafruit shop!
The LED noodles are pretty bright compared to EL wire and it’s viewable even during the day.
The arm band has 3 LED noodles powered by a 9V battery while the palm uses a single LED noodle powered by a coin cell battery.
Tags
License
Zelda TOTK UltraHand LED
by adafruit is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
最新模型
-
PVC支架 内径15.24毫米2024-05-08 -
沃尔芬（星狐零）模型2024-05-08 -
2x4工作台2024-05-08 -
通用电线指南2024-05-06 -
单行式钻石钻袋持有器（10个插槽）2024-05-06
最热下载
-
1:144 比例星际飞船模型2023-03-26 -
参数化的两部分模具生成器（用于OpenSCAD）2023-03-26 -
奥迪奥技术卡 ATH-M40x 连轴器2024-03-23 -
空客操纵杆配备控制杆固定装置2024-03-30 -
Ubiquiti UniFi AC Pro 无线接入点支架2024-04-21