三星Galaxy Tab S7FE壁挂支架

Galaxy Tab s7fe wall mount

2023-03-26 15:39:21

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

This is a wall mount for a Samsung Galaxy S7fe 12.4 tablet. I printed it in "landscape" position because in "portrait" position the nozzle hits the bed glass clamps. Reduce the skirt to 5mm so it will fit properly on the Ender-5 plus. As you can see, the concentric line mode does not work well, zig zag lines seemed to work best. I used the following outlet box and used the trim ring as the mechanism to attach the tablet mount base to the wall: "Arlington DVFR1W-1 Recessed Electrical/Outlet Mounting Box, Single Gang". I used the following outlet, which has the USB-C receptacle incorporated: "Leviton T5633-W 15-Amp Type A & Type-C USB Charger/Tamper Resistant Outlet, White". And I used the following USB-C cable to plug into the tablet while its on the wall: "USB C Cable, UMECORE 6FT 90 Degree Right Angle USB to 180 Degree Type C Fast Charging Flat Cable for Samsung Galaxy S21 S21+ S20 FE S10 S9 LG G9 G8 G7 V60 V50 V40, Pixel 5 4 3 XL, MOTO G Motorola Edge". All from Amazon. The cover just snaps on and can be removed using the printed in reliefs on the base and a small screw driver. I included the step file, its large as there are many references in it. Feel free to remix as you see fit.

三星Galaxy Tab S7FE壁挂支架

朋友，你觉得上面这个模型，属于下面的哪个分类？