超混合 VR滑稽物质案例

HyperMix SlimeVR Case

2023-03-26 15:43:11

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

I created this SlimeVR case to hold the Hyperion style PCB (see links) as I was struggling to get it to fit into the original case design due to lack of depth. The battery used is a 503759 1300mAh and the switch is a SS22F32 type and the strap is 50mm width.

To screw the case together I have used M3 heat threaded brass inserts and the screws are also M3 at 8mm long, you could adjust the design to use any screw and remove the brass inserts if needed.

To allow for an AUX tracker there is a hole in the top between the main body and the lid. This hole is designed to allow a 5mm sleeved cable to exit with a plug at the end.

Slime VR (Guide) Parts: https://docs.slimevr.dev/diy/components-guide.html
nHyperion PCB: https://oshwlab.com/lupinix/slimevr-hyperion-bmi160
nStraps Used: Trilancer Elastic Cinch Straps (Available on Amazon)

I hope that this is useful to someone and feel free to use and alter it as you like.

超混合 VR滑稽物质案例

朋友，你觉得上面这个模型，属于下面的哪个分类？