蜂巢灯罩

Honeycomb Lampshade

2023-06-21 23:35:50

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

My take on Tada3's model https://www.thingiverse.com/thing:3175389

I optimized the dimensions so it can be printed in vase mode.

The included shade.stl (approx 140mm dia x 200 mm h) can be installed as is on a pendant lamp holder or stand lamp with fitting nut.

Glue on the base adaptor (for 80mm dia lamp fitter) if you are installing on a lamp fitter. Use short filament as alignment pins to align to shade.

.f3d file for Fusion 360 included with parametric values you can change so you can customize your own.

Note that errors will occur when the cell count for each ring or stack count change. If so, just edit the affected combine feature and select all the tool bodies and it should be ok.

Print Settings

Printer:
Kossel Mini
Rafts:
No
Supports:
No
Filament brand:
Kingroon
Filament material:
PLA
Notes:
Use PLA.

Vase mode for the shade at 0.2 layer height and .5mm perimeters
Print slow and full fan on due to 30 deg overhangs.

Base adaptor can be printed normal mode

Turn on arachne feature for best results.

Tags

Lampshade spiral vase vase mode

License

CC BY-NC-SA

Honeycomb Lampshade
by boksbox is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）
2023-03-26
螺旋齿轮玩具3D模型
2023-03-26
通用型1/10比例底盘 - DKS基础款
2023-03-26
拒绝的手势
2024-04-19
安益卡通 i3 迷你 HGX 轻量挤出器
2024-04-21

最新模型