小提琴灯
Violin Lamp
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Hey, I'm glad you found my violin lamp.
This design is part of a contest. To download the top, you have to go to: https://thangs.com/designer/Ri0m0/3d-model/Violin%20Lamp-889682?manualModelView=true&source=All+Files
Don't worry, it's free. Please also leave a like that helps me a loooot.
Thanks for your support!
Here are the parts I used:
EU Plug:
https://ebay.us/PRcPvm
US Plug:
https://ebay.us/hBRN1i
You support me by suing these Links! :D
Bulb:
You support me by suing these Links! :D
You have to lean the lamp a little bit and glue the top to the main piece. You also need wire or maybe try rope that could also look nice.
Print settings:
Use normal supports only touching build plate. It prints for a loooong time. You could lean the violin a little forward, that could help if you have problems. I personally blocked all supports except for the little pins.
For the top, just print it with supports, no spacial treatment needed.
Tags
License
Violin Lamp
by Ri0m0 is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
联系我们
最新模型
-
啤酒盛放器2024-05-08 -
Nylint消音器2024-05-08 -
精简设计80mm汽车转速表仪表壳2024-05-06 -
雨滴罩密封夹具套装（针对Scirocco MK1）2024-05-06 -
原型船2024-05-06
最热下载
-
未识别十字架006A，可嵌入盒（v2）2023-03-26 -
沃帕尔六足行走机器人2023-03-26 -
Ubiquiti UniFi AC Pro 无线接入点支架2024-04-21 -
史诗级生存刀具2024-05-03 -
F1赛船3D模型固定文件2024-05-08