2英寸至1又3/16英寸船舶仪表适配器

2" to 1-3/16" Adapter for Marine Gauge Opening

2023-06-22 01:40:54

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This part is designed to fit in a standard 2" gauge opening and has a 1-3/16" hole for mounting devices designed as "cigarette lighter" replacements. I created it because I wanted to replace a non-functioning gauge in my boat with a USB Power Supply. There are a ton of devices available and are designed to replace the 12 volt plug (cigarette lighter plug). I designed this adapter to be able to use one of those devices to mount in this gauge position.

I printed in PLA with 100% infill to provide good durability and strength. The retention ring is 0.5mm bigger than the adapter and threads on really nicely and securely. I left an opening on one side of the threads to allow for tightening of the retention ring on the smaller device. You can certainly change the diameter of the center hole to fit other applications.

Print Settings

Printer brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
Yes
Infill:
100%
Filament brand:
Inland
Filament color:
Your Preference
Filament material:
PLA
Notes:
You will need a support for the opening in the thread body. I used a tree style and it worked really well. I blocked any supports around the beveled front and it printed fine... I wanted to keep the front as clean as possible.