绿洋葱水下生长平台

Green Onion Water Propagate Raft

2023-06-22 01:59:48

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I'm learning about horticulture, and wanted to see how I can do more gardening in my small apartment by combining 3D printing.

Most videos instruct to cut green onions down close to the white, leaving a bit of green. This leaves a tapered bulb. I like this video where he tests all 3 scenarios of cutting https://www.youtube.com/watch?v=u5vyzhmjNvo

Then just followed the instructions in this video
https://www.youtube.com/watch?v=vrOJ95O7JHg

I made a 50mm disc with different gauged holes from 6.5mm to 12mm. I am using a small (56mm) mason jar. If my jar is wider, I can make a larger disc, and make different sized holes. What are some common mason jar diameters?
It is printed with low infill but stronger walls to resolve
-sinking
-weathering resistance

Version 2: corners are beveled so you don't prick yourself and there's a groove in the center for the rubber band that comes with your store bought onions. It also helps keep the onions afloat.