熔焊铁笔尖端清洁网格容器

Soldering Iron Tip Cleaning Mesh Holder

2023-06-22 06:25:47

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

3D-Printable Soldering Iron Tip Cleaning Mesh Holder

General information and model dimension specifications:

This design is to be used to hold soldering iron tip cleaning mesh, fits most readily available mesh balls/packs from Amazon or other retailers and can be printed without supports.

The model was designed using Fusion 360 and dimesionally has a maxium width of 70mm (2.76 in), height of 70mm (2.76 in) and has been shelled so that all the walled sections are uniformly 2mm (0.08 in) thick.

The entrance for soldering iron tips has a maximum height of 67.07mm (2.64 in) and maximum width of 22.52mm (0.89 in).

Printing Instructions:

This model was designed to be printed with a rigid material.

In respect to slicer settings, it is reccomended for best results to print with support settings/materials disabled, 100% infill and to use "lined" pattern in shell settings as bridging between edges will be neccessary to create to top section of the model. In respect to orientation, the model should be printed with the base flat against the bed.

For reference, the example shown in the included photo image was:

Sliced in Cura 4.8.0
Printed on an Ender 3 with bed heating turned on @ 70 degrees celcius
Printer using silver 1.75mm diameter PLA filament with hot end set @ 210 degrees
celcius.
Layer height of 0.16mm and shell pattern set to lines.
Infill set to 100%.
Support material settings disabled.

Licence:

This model has been released under the Creative Commons - Attributive liscence so feel free to hare and remix to suit your needs. Please be respectful and provide attribution if you choose to modify/publish work based on this model.

It's very satisfying to see your work being utilized, so if you enjoyed the file, please do share with others who may find use with it and if you can share an image on thingiverse to help the design reach more people. If you feel generous and want to support my work, a tip is always welcomed.

Happy Printing!