Edifier R1280扬声器倾斜
Edifier R1280 Speaker Tilt
2023-06-22 13:55:49
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Tilts the front of the speakers up about 30cm.
The posts fit into the grommets for the grill very tightly, you can probably shave .5mm off the radius of the posts and still be good.
Obviously only works if you don't use the grill on your speakers, wanted to use less plastic and print faster than the full on wedges that are out there. The speakers are so light there doesn't seem to be any problem with stability.
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 v2
- Rafts:No
- Supports:No
- Resolution:0.28mm
- Infill:15%
Tags
License
CC BY
Edifier R1280 Speaker Tilt
by Zedmore is licensed under the Creative Commons - Attribution license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
猜你喜欢
联系我们
邮箱: 289047960@qq.com
最新模型
-
Taranis QX7型号运输盖带磁吸支架2024-05-08 -
核战末日保险库 - 饮品托盘标志2024-05-08 -
blink门铃钥匙2024-05-08 -
莫洛托夫标记笔3D模型2024-05-06 -
侧边挂钩VW Cabriolet2024-05-06
最热下载
-
东方风格机械关节龙3D模型2023-03-26 -
预组装的百合花盒子2023-03-26 -
3D模型：Easier Print LTT螺丝刀拉拔器2024-01-14
