古老陵墓：Thing's Mausoleum 3D模型
Thing's Mausoleum
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
A simple enough design,
If printed with 'Fuzzy Skin set at 0.1 and 0.1 (as i did using Prusa Slicer) it'll give a nice stone effect and make the layer lines mostly disappear.
I've included a couple of different roofs to choose from too.
This object was made in Tinkercad.
Print Settings
- Printer brand:
ELEGOO
- Printer:
ELEGOO NEPTUNE 2S
- Rafts:No
- Supports:Yes
- Infill:10
- Filament brand:
Esun
- Filament color:
Grey
- Filament material:
PLA
- Notes:
Use supports, the lid or roof won't print properly on an FDM printer without them.
I am installing small battery flickering lights as it's being used as part of a greater design feature.
Post-Printing
The roof or lid base is printed at 0.4mm in my case I use this to save plastic and so i could remove it and put lights inside.
How I Designed This
I designed it in Tinkercad, i used a few of their assets to help with the design but, overall it is all original.
Tags
License
Thing's Mausoleum
by Smoglets is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license.
相关内容
联系我们
热门推荐
-
博士奇异人雕塑支撑免费版2023-03-27 -
Plexiglas 打印机外壳设计优良通风2023-05-10 -
车轮氧化模拟工具 for RR-Wheels2023-08-20 -
晶体奇迹2024-03-21 -
安迪门打印机 Ender 3 V3 SE 侧边安装丝盘支架 + 导线导引装置改进版2024-04-09
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
Glock 17/34 Solidworks 模型文件2023-04-21 -
盐湖插入整理器2024-04-13 -
GLOCK 17（第三代）蓝枪2024-04-13 -
克利普施 Promedia 2.1音量Pod模拟机器架（铝制支架）安装基座2024-04-29
最新模型
-
3d打印的男人凉鞋2025-07-17 -
裸女站立2025-07-16 -
大码动漫女战士2025-07-15 -
真实玩偶 / 镶有凸圆形玻璃参数的眼睛2025-07-15
