MR60 面板安装连接器
MR60 Panel Mount Connector
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Amass-style MR60 panel mount connector that I printed and used on my esk8 enclosure for my phase wires. I printed mine out of PETG, use your own material at your own discretion. I through-bolted using M4 hardware and the gasket which I printed from TPU. You will need to remove the 4mm bullet connectors from an existing MR60 connector (male) and epoxy them in place in the new panel mount. Plug a female side in to hold your bullets in place and epoxy. You are better off soldering the bullets onto your wires before epoxying so you don't subject your printed panel mount to the heat of soldering.
Print Settings
- Printer:
Bambu X1C
- Rafts:No
- Supports:No
- Resolution:0.2 layer height
- Infill:100%
- Filament brand:
Overture
- Filament color:
Black
- Filament material:
PETG
Tags
License
MR60 Panel Mount Connector
by ablairlamb is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
Fidget Spinner - 单体打印 / 无需轴承2023-03-26 -
坚固盒子 for HDZero2023-05-01 -
2x Philips Hue开关控制面板2023-05-01 -
三星杰特吸尘器 - 工具伙伴2023-05-04 -
SNZB-04户外箱2024-03-20
最热下载
-
人耳道2023-03-26 -
GPD Win3 把手型号2023-04-07 -
Glock 17/34 Solidworks 模型文件2023-04-21 -
高尔夫球支架 / 展示架 / 陈列架 / 收纳架2024-03-29 -
HomePod mini 壁挂式插座支架（欧规版）｜稳固不占地·支持线材整理2024-05-04
最新模型
-
罗技K400键盘壁挂式支架2025-07-27 -
性感美女3d人像（带基座）2025-07-17 -
鞋带锁2025-07-17 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24
