关键英雄程序员案例——为Mr. Blinky设计的指南/部件

Vital Hero Programmer Case - For Mr. Blinky Guide/Parts

2024-04-22 22:39:07

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I followed Mr. Blinkey's guide on how to build your own DIM programmer in order to back-up my personal DIM cards. I got tired of looking at the exposed programmer and wires, so I drafted this case to keep it all tidy.

Print Settings

Printer brand:
Bambu Lab
Printer:
A1
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.16mm
Infill:
20%
Notes:
I ended up using a little bit of superglue on one end to keep it together, but you could use a rubber band or zip tie to make it non permanent.

FYI - I accidentally bought connector wires that were too long, so my fitment was a little tight, in terms of positioning the wire before closing the unit. You just want to be careful and not pinch your wires between the center column/peg used to hold down your circuit board.

If possible, please follow my Instagram blog page @3dbyjoe