Bambu实验室X1C小部件存储盒（配热端组装夹持装置）

Bambu Lab X1C Small Parts Storage w/Hotend Assembly Holders

2023-06-23 01:56:17

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

When looking for a small parts storage box I didn't find anything I liked. The most popular box you'll see is something that looks like you're taking your parts on an expedition through the Amazon rainforest. I also wanted to have a way to store and nicely and safely arrange my spare hot ends.

This is a PRINT IN PLACE box. It's fits entirely on the build plate even with the flow calibration lines and purge tower.

Box Dimensions
175mm length
107mm width (not including hinge and latch)
61.50mm height (closed)

Compartment Dimensions
55mm length
32mm width
27mm height

Features:
Hotend Assembly Holders:
• Has small retainers in the space that lightly but securely holds them in place.
• The bottom also has little extrusions on the dividers that stick up to keep the nozzles in place when the box is closed. See section view for a detail.

Compartments:
• Fillet in bottom to aid in taking parts out.

I printed this with 10% gyroid infill using a .4mm nozzle and .2 layer height with Bambu PLA Basic.

Print time is roughly 5 hours.

Thanks to Nanodesigner for making a 3D model of the Bambu Lab X1C Nozzle!
You can find that here: link