带夹组件+线缆固定器

Strap Clip + Cable Retainer

2024-04-16 03:09:22

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a strap clip to tame the end of your instrument's strap as well as its cable.

This is similar to the Maxonix CableKey, but allows easy insertion/removal of the cable; no need to remove the whole clip or awkwardly feed the cable through. It prevents the cable from breaking your instrument's jack, and is more convenient than the traditional method of feeding the cable through/around the strap.

It also doubles as way to keep the two loose ends of the strap together rather than flopping around when you put your guitar/bass onto its stand.

There are 2 inch (50.8mm) and 3 inch (76.2mm) versions, as well as options without the cable retainer.

The strap clip is made to fit nylon/polypropylene straps of about 1.5mm in thickness. Leather may be too thick, but YMMV. It shouldn't slide around due to the texturing on the inside.

The cable retainer fits instrument cables of around 8mm in thickness. I tested it with chunky rubber-wrapped Pig Hog cables and thinner woven cables (pictured).