RC无裙式飞行器升降电机支架

RC Skirtless Hovercraft - Lift Motor Clamp Mount 12x12mm beam

2023-06-23 05:24:47

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is the mount that clamps the lift motors to the spar of the hovercraft. The bolthole pattern is standard 23mm X with 3mm dia holes as used in common Turnigy etc motors.

My standard spar is '12x12mm' balsa, however the actual dimensions can vary significantly. Some '12x12mm' is actually 1/2" x 1/2" cuts which is 12.7x12.7mm. I also wrap a layer of tape around the clamp area to protect the wood surface. All this means my actual clamping width can be ~13.4mm in practice.

The multiple increments should allow you to find one that suits your particular beam.

Print Settings

Printer brand:
Anycubic
Printer:
i3 Mega S/Pro
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
50-100% Cubic
Filament brand:
RS PRO
Filament material:
PLA
Notes:
Print with the clamp ridges up - no supports needed.
This is a highly stressed part so <50% infill not recommended. 100% adds a few grams.
With a 0.4mm nozzle I typically use 4+ layers of walls to 'fill in' the boltholes to the perimeter.

License

CC BY-NC

RC Skirtless Hovercraft - Lift Motor Clamp Mount 12x12mm beam
by Glydaire_Prints is licensed under the Creative Commons - Attribution - Non-Commercial license.

RC无裙式飞行器升降电机支架

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

40×0型风扇安装件（适用于E3DV6型号散热片，中心对齐）
2023-05-28
小米手表2 Pro 拉德弹簧扣款式
2024-01-15
王国之泪TOTK光龙塞尔达传说
2024-04-20
乒乓球无气
2024-04-22
eGPU外设机箱设计用于UT3G
2024-04-29

最热下载

弓箭和投射器战车前轮
2023-04-12
红米手表4号充电基座
2024-03-15
二十面体骰子模型
2024-03-29
Ubiquiti UniFi AC Pro 无线接入点支架
2024-04-21
比基尼模型
2025-07-16

最新模型