Clothesline Spacer

2023-06-23 15:54:48

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

If you live in a small apartment, or spend a lot of time in hotels, you know how space can quickly become limited on a clothesline. When you add coat hangers onto the clothesline (to save space), the garments will quickly make the line sag, causing all of the clothes to bunch up together at the centre of the line.

These spacers ensure adequate spacing between hangers. They are easy to attach and detach. They are designed for a 1.5mm diameter wire clothesline.

You can view and export the design here, using OnShape.

Print Settings

Printer brand:
MakerBot
Printer:
MakerBot Replicator 2
Rafts:
No
Supports:
No
Resolution:
0.3
Infill:
15% gyroid
Filament brand:
MG Chemicals
Filament color:
White
Filament material:
PLA
Notes:
Print in a vertical orientation: so that the hole through the tube runs on the vertical axis.

If you're going to scale this for a larger clothesline, be sure to scale in all three dimensions (the helical pitch of the slot that runs through the part is tuned for the tension of a typical wire clothesline)