皮卡丘手表台

Pikachu Watch Stand for Pokemon Watch

2023-06-25 04:20:19

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Pikachu holds your watch while you're not wearing it. I designed this watch stand to hold a specific Pokemon watch, but it's possible for it to work with other watches. I included step and Fusion 360 (.f3d) design files to make it easy to remix. Pikachu was traced from an image that was shamelessly pilfered from a google image search. The tail was designed to hold the watch. Design was done in Fusion 360.

This was intended to be printed using a multi-material setup. I printed Pikachu and the base separately using a Creality CR-10 and Mosaic Palette 2 (4 colors). Pikachu was printed with the face against the build surface to minimize filament use on the transition tower. The base was printed with the top against the build surface to avoid using supports.

I sliced the models using PrusaSlicer 2.5.2 with P2PP using the .3mf files which contain all bodies that make up each object. I found the .3mf files worked best in PrusaSlicer since it automatically aligned all bodies and the correct names for each body were also brought in. Simplify3D 4.1.2 was not able to correctly separate the bodies of the .3mf files. I also included separate .stl files of all bodies which can be used with any slicer. Most popular slicers should be able to align the origins of the models to correctly assemble them for printing.

Pikachu mounts to the base using 2x M4 fasteners, a length between 8 mm and 20 mm will work.

Print Settings

Printer brand:
Creality
Printer:
CR-10
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
25%
Filament brand:
3D Solutech
Filament color:
Yellow
Filament material:
PLA
Notes:
Pikachu and base were printed separately using Mosaic Palette 2 for multi-material printing. Pikachu was printed with the face against the build surface to minimize filament use on the transition tower. The base was printed with the top against the build surface to avoid using supports.