自行车鼓棒持有器
Drumstick holder for bike
2023-06-25 19:23:10
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a drumstick holder to install on bike slot for drinks with two screws.
It's a little bit hard to fix the drumsticks but you can easily take them out by pulling at the end of the stick so the sticks don't moove and are correctly fixed
This is concepted for 5A drumsticks but you can change the drumstick diameter in the Fusion360 file.
Print it verticaly without support but you can add support for better quality for the screws holes
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3 Pro
- Rafts:Doesn't Matter
- Supports:No
- Resolution:100%
- Filament brand:
Flashforge
- Filament material:
Pla
- Notes:
-
Print it vertically
- Add support if you want for better screws holes quality
-
Tags
License
CC BY
Drumstick holder for bike
by sabu8 is licensed under the Creative Commons - Attribution license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
热门推荐
-
EEZYbotARM MK2智能机器人3D模型2023-03-26 -
2022版Modern Warfare 2激励模拟2023-05-06 -
五颗晶莹的小鹅卵石（附带架子）2023-07-23 -
基础巨人模型2024-03-17 -
FV4005 第二阶段2024-04-23
最热下载
-
欧宝Zafira B倒挡锁止机构（倒挡防误入装置）2024-04-02 -
18650电池存储盒2024-04-18 -
适用于ebyte E104-BT5040U USB适配器的外壳2024-04-28
最新模型
-
适用于Raspberry Pi5的多功能适配器外壳2025-07-27 -
FLsun SR HGX Bambu直接驱动挤出机2025-07-18 -
天使和恶魔2025-07-16 -
原神优菈2025-06-27
