STL文件 - 拉森NMO天线支架替换部件

STL Files - Replacement Parts for Larsen NMO Antenna Mount

2023-06-25 19:56:19

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

joeping created these Larsen NMO replacement parts in .scad file format. I only needed the NMO bottom gasket/washer, but in order to print it I had to open up the SCAD file, render the part, then export to STL.

So, I went ahead and took his SCAD files and converted them to STL to make it easier for folks who might be in a similar situation to print direct from STL.

Hope this helps! For all original design information, please see joeping's original "Replacement Parts for Larsen NMO Antenna Mount" post/thing here: https://www.thingiverse.com/thing:4376430

Print Settings

Rafts:
No
Supports:
No
Resolution:
0.4mm
Infill:
50%
Filament brand:
Ninjaflex TPU
Filament color:
Black
Filament material:
TPU
Notes:
The rubber parts were printed with TPU, the internal hard parts were printed with PLA