SIG 550 墙挂式支撑架
SIG 550 Wall Mount Wall Holder
2023-06-25 23:46:46
使用说明
- 所有模型资源均由用户上传分享,内容来源于网络公开资源
- 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
- 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用
我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!
扫码手机访问
抖音私信 @jobsfanSummary
SIG SG 550 Wall Mount Wall Holder
Print Settings
- Printer:
Bambu Lab X1 Carbon
- Rafts:Doesn't Matter
- Supports:No
- Resolution:0.20
- Infill:15%
- Filament brand:
Creality
- Filament color:
Transparent Blue
- Filament material:
PETG
- Notes:
In the picture the mount for the barrel is a bit longer than in the stl file given here. Now both have a width of 15 mm. Never tried but should work with PLA. You can drill the holes for the screws on the same height. The length from hole to hole is 68 cm. I used M4 screws, the screw heads have a diameter of 7.7 mm. Hope you enjoy it:)
Tags
License
CC BY
SIG 550 Wall Mount Wall Holder
by HatschiBubu is licensed under the Creative Commons - Attribution license.
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15
猜你喜欢
联系我们
邮箱: 289047960@qq.com
热门推荐
-
智能家居部件与激光切割文件3D模型2023-05-28
-
嵌入式卫生纸/浴巾持有器(适用于大型卷尺)2023-09-08
-
固定点平衡2024-04-07
-
可定制的钥匙扣2024-04-29
-
原神优菈2025-06-27
最热下载
-
小鸡绘画机(Eggbot衍生版)v1.12023-03-26
-
3D打印斯特林发动机型号Alpha2023-03-26
-
原始控制舱2024-03-25
-
Wolf系列手机支架2024-03-26
-
BlueSCSI v2 SPARCstation驱动器支架及密封环2024-04-14
最新模型
-
定制曼达洛人头盔附带曲奇切割器2024-05-08
-
卡塔琳娜22型船模桅杆门2024-05-08
-
Cobra Viper RDT7角色扮演道具模型2024-05-06
-
无蝇防虫网安装支架2024-05-06
-
原型船2024-05-06