螺纹圈夹持器 - 我对填充物的改进设计
br Spool Holder - my take on the Filler
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This spool holder is my version of a spool holder that works in HugoHuge's https://www.thingiverse.com/hugohuge/designs Filler Spool Holder ecosystem.
All parts print without supports.
Look in my Spool Holder Collection at https://www.printables.com/@brass_ring/collections/713739 and https://www.thingiverse.com/brass_ring/collections/38795236/things to see my spool holder accessories.
Required additional hardware:
- 2 X 608 bearings
- 1 X Filler brace for mounting the spool holder https://www.thingiverse.com/thing:3020026
The guide has the following additional features:
- the bearings have taller side walls to keep them in place
- there are slots to accept zip ties lock the roller assembly in place
- the X100 mm size will with Filler Spool Holder compatible rollers
- it is marked for roller size
- print with the bottom on the build plate
The roller:
- has a thinner profile that is working well for me
- it prints in two pieces to eliminate supports
- it is marked for size
- print with the end with the hole on the build plate
- the size is the distance measured between stepped faces
The roller pin:
- print with the unstepped end on the build plate
Tags
License
br Spool Holder - my take on the Filler
by brass_ring is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
联系我们
热门推荐
-
户外单元安装3D模型2023-03-26 -
全能3D打印机测试2023-03-26 -
Plexiglas 打印机外壳设计优良通风2023-05-10 -
晶体奇迹2024-03-21 -
命运博士头盔2024-03-25
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
QC USB充电器外壳（XFW-KC42-4）2024-01-17 -
盐湖插入整理器2024-04-13 -
GTA 5 大地图模型2024-04-21 -
沙箱建筑模型2024-05-08
最新模型
-
一体打印活动关节熊猫和支架2025-07-25 -
弹弓HGX-FRAME V1A2025-07-18 -
鞋撑2025-07-17 -
泡泡底拖鞋2025-07-17 -
裸女站立2025-07-16