热水盆适配器

Hot Tub adapter

2023-06-27 17:34:32

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A work in progress for discussion amongst collegues.
The long range project is to heat the MSpa hot tub from a remote heat source.
This is the first step in figuring out the plumbing fittings. I found a jet Nozzle here :
https://www.thingiverse.com/thing:3122220 by https://www.thingiverse.com/fransm.
I imported it into FreeCad, did the mesh conversion and subtracted what I needed to to create a threaded flange. I then created a matching negative space Nut to make a sealed fitting. Next step will probably be adding a hose barb to connect to external heat source.
Yes I could have figured out how to do threads, but this was more in my skill set.
I left each of the steps in the FreeCad file so that you could follow the steps from importing the original STL to the new STL.

Photo's included are : The original MSpa flange and The first cut of the found jet listed above that provided the thread for threading the original flange into.

Just printing first test in PLA will likely print final in ABS or PETG will post pictures and more details as the project progresses.