h8r外轮柱

h8r outerbarrel

2023-06-27 17:36:50

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

this is my version of a slightly better outer barrel / tip.
i creadet this tip because in germany this reolver is sold with a tip that is flush with the body of the revolver.

important thing i have to add is that i printed it lying on the side so it wont break on you. that is most likely to happen when you print it standing on the sqare part. oh and i printed it with extrusive slicing tolerances so i would have less work sanding everything to fit.

i might add that if you want to give the fluted outerbarrel a shot i would suggest to create some thin supports under the square that actually touch the part. just like in the other barrel. you will see what i mean