谷仓门锁（可从外部解锁）

Barn (Sliding) Door Lock - Unlockable from Outside

2023-06-27 17:37:11

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A lock solution for your barn door (bathroom or bedroom) that can be unlocked from the outside with a narrow screwdriver. I didn't want to pay $40+ for something with similar functionality, and wife didn't want a cheap latch.

Printed at an angle for extra strength, in PLA+. PLA would probably be fine - I made it extra thick for strength as well.
Use supports
I used 100% fill (50% should be fine)
Printing at 45 degree angle for extra strength

I'm using a 1/2" dowel, about 8" long. To be honest I made and installed this a while ago so I don't remember the size of the drill bit - but the cylinder on the receiver is 3/4" in diameter (so probably a 3/4" drill bit). Be sure to line up the "receiver" with the "plate" before you drill holes ... Also, be sure your wood screws are long enough to sink into a stud - not just the drywall.

Been meaning to add a knob/handle (eye screw) to the dowel and paint it - got lazy and haven't finished it yet.