Ender 3打印机90度电缆安装指南
Ender 3 cable guide - 90 degree
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
added feet using a spacer that slides into the rails on the Ender 3 printers, and simply opened up the tube to allow the cable to slide in. should be easy enough to create a closing mechanism if needed but this holds cables fine as is.
Small update a day later: I changed the design to be able to snap in and out of the Ender 3 frame rails. Printed in old PLA and it doesn't seem too brittle, though I was worried about the size of the clipping portion. This design can still slide in and out from the edges too.
Leaving both versions for options
License
Ender 3 cable guide - 90 degree
by ABagOfFritos is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
FPV 遥控坦克 V2.0 模型2023-03-26 -
快乐之城：Grozilla插入模型2024-01-17 -
Razer Seiren mini ikea灯具模组2024-03-14 -
基础巨人模型2024-03-17 -
Yoda的抉择2024-04-21
最热下载
-
ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）2023-03-26 -
通用型1/10比例底盘 - DKS基础款2023-03-26 -
30.5mm到25mm转换板（用于飞行控制器堆叠结构）2023-04-03 -
索尼NP-FW50电池专用外壳（5个装）2024-04-24 -
厨房水槽滤网过滤器2025-06-05
最新模型
-
适用于Raspberry Pi5的多功能适配器外壳2025-07-27 -
女式凉鞋2025-07-16 -
系带3D凉鞋（儿童款）2025-07-16 -
兔女郎半身像2025-07-15