顶点 - 机械臂着陆辅助平台 - 快速控制系统 V5
Apex - Arm Landing Skid - ImpluseRC - V5
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
ImpluseRC Apex Landing Arm Skids for 5 Inch Frame.
Fits Standard 5 Inch Arms @ 5.5mm thickness.
Design gives approx 12mm clearence from base of arm to floor. Designed to slip on over to keep motor bolts clean. Tie wrap can be used optional but the skid should stay on without.
Two Versions. 1.55mm Wall Version is my prefered design but there is a thicker verison (2.3mm).
I would advise printing both designs with only two walls thick, 0% infil. Turn off gap infill.
The 1.55mm wall = 3.5g each & 2.3mm = 3.8g approx.
Print upright, one at a time for a clean print without supports. Trust printer to bridge gap.
If you like the design, please consider dropping a few pennies my way. I'd appreciate even the smallest amount and it will spur me on to uploading even more of my designs.... the vast majority don't make it onto sharing sites because it's time consuming.
Happy Flying Guys
Print Settings
- Printer brand:
Prusa
- Printer:
I3 MK3S
- Rafts:No
- Supports:No
- Resolution:0.2mm
- Infill:2 Walls - 0% Infill
- Filament brand:
Any
- Filament color:
Any
- Filament material:
TPU, TPE, Flex
Tags
License
Apex - Arm Landing Skid - ImpluseRC - V5
by T_Graham8622 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
猜你喜欢
联系我们
最新模型
-
骷髅鸭2025-05-16 -
螺旋耳环（加粗款）2024-05-08 -
手电筒支架2024-05-08 -
花环戒指2024-05-08 -
Zyn/Chino容器罐2024-05-06
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
伊瑟宁加德骰子塔（奥斯坦克）2024-01-17 -
Arduino或5V继电器控制板固定架2024-04-02 -
浴室排水器2024-04-07
