T-Beacon 黑钻石 3D模型
tBeacon Onyx
2023-06-28 06:21:52
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This thing is protective case for tBeacon Onyx rc model search electronic device
You need additional materials for this tBeacon Onyx case:
- Fiberglass rod 1.2 mm diameter 178 mm lenght. DO NOT USE CARBON or ANY METAL rod because it is not a dielectric and your tBeacon Onyx antenna will not work properly.
- 4 metal screws 2.6 mm diameter 10 mm length. Or if you don't want to disassembly the case (for example to change old battery or something else) you can just glue upper and lower parts together and don't use metal screws. It will make the case slightly lighter.
- Any glue for to glue Fiberglass rod in it's case body hole. I used CA.
- Any material for to put this case with tBeacon Onyx at your model. I used velcro.
- Any heat-shrink tube 1.5 mm diameter for to fix tBeacon Onix antenna to fiberglass rod.
Print Settings
- Printer brand:
Flsun
- Printer:
Flsun QQ-S
- Supports:Doesn't Matter
- Resolution:0.4 mm
- Infill:100%
- Filament brand:
NoName
- Filament color:
White
- Filament material:
PLA
License
CC BY-NC
tBeacon Onyx
by ClearSky27 is licensed under the Creative Commons - Attribution - Non-Commercial license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
猜你喜欢
联系我们
邮箱: 289047960@qq.com
最新模型
-
线轴固定架2024-05-08 -
心形花瓶 Mother's Day 特别版2024-05-08 -
浴室里的男人建模2024-05-08 -
摩洛哥过山车模型套装2024-05-06 -
Oral-B双齿夹持器3D模型2024-05-06
最热下载
-
钥匙扣2023-03-26 -
参数化的两部分模具生成器（用于OpenSCAD）2023-03-26 -
线框无心2024-05-08
