收据持有者外壳设计

Receipt Holder Casing

2023-07-22 18:18:41

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Receipt holder casing for custom made/welded together receipt holder. Metal rod is heavy and sharp sitting on the base. Hence putting a case around it. Will have to drill hole on top of base to fit the rod through, not aligned to exact center, slightly angled.

Glued together with Super-Glue or Hot Glue Gun. Visually appealing and able to distinguish from other receipt holders near by cash register.

UPDATE: Have recently uploaded a design with an 8mm hole. Large enough to make up for the angled rod that sticks out.

UPDATE: Images show half printed design, due to running out of filament halfway through printing. Full print will cover the sides of base properly. Plenty of space for the base to move around. Can be super-glued once setup.