Crawler爬行器运载体轴承GSpeed FS Gshot

Crawler Carrier Bearing GSpeed FS Gshot

2023-07-23 11:57:03

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I made this to fit the gspeed FS chassis with 67mm wide gshot skid and added one for the 78mm skid..They ain't real pretty but the 67mm one's been tested pretty thoroughly  on the rocks..I used  one existing hole  in the chassis and the lip on the adapter to secure..Or you could put it wherever if you drilled some 3mm holes.You'll need to add 5mm ID spacer(s) on one or both sides to retain the bearing as I kept the housing shallow for a little more adjustment...hope this helps

Transfer case shaft Part# AXI31410

ProTek RC 5x10x4mm Rubber Sealed Flanged "Speed" Bearing PTK-10104

printed from petg...100% infill..