SCX24 - Injora 64*24mm Rock Terrain Crawler Tyre Wheel Inserts for MofoRC Rims

SCX24 - Wheel Inserts for Injora 64*24mm Rock Terrain Crawler Tyre on MofoRC Rims

2024-04-29 05:23:45

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

SCX24 - Injora 64*24mm Rock Terrain Crawler Tyre Wheel Inserts for MofoRC Rims

Summary

These are wheel/tyre inserts for Injora 64*24mm Rock Terrain Crawler Tyre on MofoRC DDP 1.0" Rims designed to be printed in TPU-87A.

I've used FlubRC SlymeBallz before and they're a great improvement over the stock foams when the rig starts to get heavier but i was never 100% satisfied with them so i've designed my own.

These further improve sidehilling and side stability aswell as understeering. They have a two stage design with the first stage providing a nice squish over objects and edges while the second harder stage provides stability and predictabilty.

The insert has an outer diameter of 58mm and a width of 19mm so maybe it works with smaller tyres aswell but i havent tested that.

The inner diameter is 29.2mm to have slight press fit on the MofoRC rims which have an outer ring diameter of 29.5mm.

I strongly suggest to print them in TPU-87A because other filaments are not flexible enough, i've printed them in TPU-91A aswell and they were way too hard.

No brimm or support needed but you will get a lot of stringing because if the design.

Wall generator needs to be set to Arachne or it wont be able to slice the fine lines correct.

There are 3 files provided, a stl, a step and a Fusion360 f3d file incase anyone wants to change something.

For reference, the C10 in the picture weights about 600g with a 60/40 weight distribution.

https://www.injora.com/products/injora-4pcs-1-0-64-24mm-super-soft-sticky-rock-crawling-tires-for-1-18-1-24-rc-crawlers-t1011

https://moforc.com/products/ddps-silver-or-black-deep-dish-premium-beadlock-wheels-1-0-for-scx24-use-mf6-hubs?variant=39777510359097

https://www.esun3d.com/eflex-tpu-87a-product/

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu P1S
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
Doesnt matter
Filament brand:
eSun eFlex
Filament color:
Clear
Filament material:
TPU-87A
Notes:
Wall generator needs to be set to Arachne or it wont be able to slice the fine lines correct.