3dsjs

HEPA13过滤器到120mm风扇适配器 3D模型

HEPA13 Filter to 120mm Fan Adapter

2023-07-23 11:58:34

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

To reduce the amount of particles and evaporations of the 3D printer I created this adapter as an exhaust vent of my printer housing. From previous tests there was still a hole with 95mm in diameter for which the 95 to 120mm adapter is used.

The Adapter ist designed for HEPA13 filter like Miele SF-HA50. Which is not that cheap but fits the requirements. According to the HEPA13 standard, the emissions produced during 3D printing are filtered as far as possible. When assembling, make sure that the exhaust air can not escape everywhere else than through the filter.

You need some additional parts like the fan itself and a Miele SF-HA50 filter. The filter is designed to be used as particle filter in vacuum cleaners.

Additional Parts

1x Fan 120mm with high static pressure. E.g. Noctua F12
4x Screws 20mm M3
4x Nuts M3
4x Washers M3
Sealing (e.g. double-sided and padded tape)

Print Settings

  • Printer brand:

    Sovol 3D

  • Printer:

    Sovol SV06

  • Rafts:
    No
  • Supports:
    No
  • Resolution:
    0.6mm
  • Infill:
    10% (ZigZag)
  • Filament brand:

    PolyTerra™

  • Filament color:

    white

  • Filament material:

    PLA

  • Notes:

    Printer Settings

    Nozzle 0.4mm
    Line width 0.6mm
    Line width 0.6mm
    Line height 0.3mm
    Walls 2-3
    Top/Bottom 3 layers
    Fan 50-100% (0% on first layer)
    Nozzle Temp 210ºC
    Bed Temp 0ºC (50ºC on first layer)

    Make sure you have levelled your bed pretty well.

Tags

License

CC0

HEPA13 Filter to 120mm Fan Adapter
by kuhmuhuhnkel is licensed under the Creative Commons - Public Domain Dedication license.

HEPA13过滤器到120mm风扇适配器 3D模型
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15

相关内容

猜你喜欢