Tater Tot 6圆柱压成型机

Tater Tot Press (6 cylinder)

2023-07-23 11:59:01

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is the first version of my tater tot press. Just fill the cylinders with tater tot mix (shredded potatoes, etc.), place the lid and press down on the counter. Remove the lid and hit the pins on the back to release the pressed tater tots.

In a future version, I would like to have the lid have a hinge, a screw on back part for the pins, and possibly look at designs where flipping the lid forces the compression.

Recommend food grade printer and supplies to fabricate. Not recommended for commercial applications.

If you have ideas or suggestions, please feel free to leave a comment.

As always, the blender file is provided for those who would like to easily mess with the design.