ETS2/ATS 转向信号开关

Turn Signal Switch for ETS2/ATS

2023-07-23 13:46:19

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This part is a turn signal switch for Euro Truck Simulator 2/American Truck Simulator to be added to the steering wheel controller. To be recognized as a gamepad, it is connected to the M5Stack ATOMS3.

Required Parts

3D printed these parts x2 set
3 position Toggle Switch (on-off-on) x2
Self-Tapping screws (2mm x 8mm) x8
M5Stack ATOMS3 x1
M5Stack ATOMIC DIY Proto Kit for ATOM series x1
some cable

How to Buid

3D print these parts.
Attach the switch to the chassis. Place a nut across the hole and secure with radio pliers.
Wiring to the switch.
Attach the lever to the knob of the switch. If the hole is small, insert a hot iron rod to melt it. Fix the gap with grue(or melt it).
Attach the lid to the chassis.

Wiring to ATOMS3

see my blog: https://akibabara.com/blog/6925.html

GPIO 8 --> Switch1 (Blinker: left)
GPIO 7 --> Switch1 (Blinker: right)
GPIO 6 --> Switch2 (Shifter: forward)
GPIO 5 --> Switch2 (Shifter: reverse)
3.3V --> Switch1 center pin, Switch2 center pin

ATOMS3 Programs

Use the Arduino IDE to write the program to ATOMS3.
Program Exsample: https://github.com/kaz-mac/misc/tree/master/ETS2Controller

Setup the PC and Game

Connect the power supply to the ATOMS3 and perform Bluetooth pairing on the PC.
Add this controller to ETS2/ATS.
Change the game settings to match the switch specifications as follows
Automatic blinker turn off: off
Transmission: Real Automatic
Press the switch to set the key assignments.

Enjoy the drive!