3dsjs

角落式卫生纸发射器

Corner Toilet Paper Dispenser

2023-07-24 17:40:24

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

This is a Toilet Paper Dispenser that tucks nicely in the corner and provides a nice shelf. There are two version based on the toilet paper roll holder.

-- This is printed upside down with no supports. Brim should be used to prevent warping and let cool slowly before removing.

Version A - This was my initial version with a printed tube holder. This works but the tube spins pretty fast as it's plastic on plastic.

Version B - This was modified to hold a standard tube holder purchased at your local hardware store, instead of the printed one.

Plug - This was created to convert version A to used a typical tube holder like version B. This plugs the larger hole and provides the size for a standard tube holder.

License

CC BY

Corner Toilet Paper Dispenser
by George-Corrigan is licensed under the Creative Commons - Attribution license.

角落式卫生纸发射器
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15

相关内容

猜你喜欢