ABPC：Bambu Carbon X1 3D打印机的更优粪便管道解决方案

ABPC - A Better Poop Chute for Bambu Carbon X1 3D printer

2023-07-24 17:41:26

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I built A Better Poop Chute (ABPC).
This Bambu Poop Chute holds onto the back of the printer with magnets only, and has smooth radiuses throughout to ease any chance of poop constipation.

Magnet size is 8mm diameter, 5mm tall. They can be sourced from eBay/amazon etc, and glued in with superglue/CA etc.

I printed mine from the Magenta PLA that came with the Bambu X1 Printer and it worked fine.

I added support for a 30° overhang threshold, but you may want to go even more as the big radiuses outer edges start pretty flat.

Print Settings

Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2mm
Infill:
n/a
Filament brand:
Bambu PLA Basic
Filament material:
PLA
Notes:
This fits on the Bambu X1 plate. Needs quite a bit of support due to the nature of the overhangs when printing, but you'll be happy with your ABPC when it's done.