狗球抛物线式玩具

Dog Ball Chuck With Screws

2023-07-24 21:26:55

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a complete redesign of the Go Fetch! Ball Chucker by Maury M Marques in https://www.printables.com/model/465058-go-fetch-ball-chucker-stronger-arm. It is not a remix, since the entire structure was redesigned from scratch using Fusion 360. The original design required gluing the three pieces together, the shell was too thin and the joint was very weak. I redesigned it so that the body is stronger, and the parts are joined together with two M5 20mm screws and two M5 4mm nuts. This avoids having to glue the parts together.

I wanted a ball chucker that I could use to play with my dogs. The device works well with standard tennis balls and the larger 72 mm balls as well.

Printed in PETG with 20% infill and organic/tree supports.

Included is the design file for Fusion 360, so feel free to experiment with the design and improve it.