Bosch Avanar Solo 打磨机转换顶部
Bosch Avanar Solo Melderwisselkop
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a tool that fits on a SOLO test and maintenance pole to replace Bosch FPA-425-... detectors.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3
- Rafts:No
- Supports:No
- Resolution:0,4 nozzel - 0,2 layerhight
- Infill:20%
- Filament brand:
123D
- Filament color:
Black
- Filament material:
PLA
- Notes:
I print the handle in two half's.
Loaded the handle twice and lay them flat on de bed (in Cura) in opposite directions.
Then lower them 16mm in to the bed.For strength I printed a 6mm round disk for lining the push-button.
And I added a 12mm aluminium rod between the two half's (Not included in this design and pictures).
See the explode view for details.I glued everting together with CA-glue.
License
Bosch Avanar Solo Melderwisselkop
by CReations3Design is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
猜你喜欢
联系我们
热门推荐
-
TopSolar 100W 太阳能板支撑架2023-05-03 -
冲击RC微型顶点4英寸GoPro英雄支架2023-05-14 -
GUY AA 装甲车2024-01-05 -
Ferrari 458 Italia 3D模型2024-01-07
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
Glock 17/34 Solidworks 模型文件2023-04-21 -
GMX曲线支架支持GoPro安装（或轻型结构）2023-05-22 -
Hein Gericke 摩托车骑行服 Hiprotec 系统用的按扣（替换件）2024-04-03 -
沙箱建筑模型2024-05-08
最新模型
-
罗技K400键盘壁挂式支架2025-07-27 -
HGX lite v2支架2025-07-18 -
hgx挤出机头火炮响尾蛇 X3 SWX3 HGX lite 2.002025-07-18 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24
