Cr10v2/v3 轨道器 1.5 安装模块

Cr10v2/v3 Orbiter 1.5 Mount

2023-07-25 02:51:14

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I had an orbiter 1.5 sitting around from my old ender3 and noticed there was no orbiter upgrades posted for the v2/v3. I found 1 for the cr10 pro v2 but they wanted you to drill into the stock x carriage which i wasn't a fan of. This is designed to slide over the stock x carriage and bolt through it like many of the direct drive upgrades using the stock extruder.

What you'll need to install:

4 16mm m3 bolts of your choosing and corresponding nuts.

Notes:

On my machine the orbiter mounting points fit the screws snug enough you have to thread them through. but I still used m3 nuts on the back side to be safe since according to the creator the orbiter can put out 6-7 kilos of force pushing back.

I printed it on it's side with no supports out of flashforge asa
250c nozz 105 bed
.6mm nozzle
.2 mm layer height
4 walls
25% infill