CR-10智能增强版磁板配件

CR-10 Smart Mod For K1 Max Magnetic Plate

2024-04-08 01:47:20

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Since I have a K1 Max printer and the bed size is the same as the CR-10 Smart, I wanted to be able to swap the base plate between them.
This can also be used just to convert from glass bed to magnetic plate.

For this mod you will need:

K1 Max Magnetic Base;
K1 Max Magnetic Plate;
Printed Guide Parts.

PRINTED PARTS
I designed these two pieces to correctly guide the plate using the stock fixing.
Printed on ABS with supports.

MOD
After applying the magnetic base, I used the bottom side to mark the holes and then open them on top with a scalpel.
I drilled all the holes, to have access to tighten the screws when necessary or to disassemble the base for any reason.
Mount the guides and that's it (don't forget to attach the wire to the left guide).

Thank you.