CR-10单120MM风扇带原装底座
CR-10 single 120mm fan with original feet
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I remixed replayreb's remix of tekblub's cr-10 control box base plate & legs for dual 120mm fans.
Removed the rear 120mm fan.
If you have longer bolts and nuts you can easily reuse the original feet by substituting the two front fan screws and just bolting the back two on.
I ended up relacing the fan in the photo with a Noctua NF-P12 redux-900 powered right from the PSU 12V instead of the fan plug on the PSU. The 900 RPM Noctua has double the CFM of the stock 60mm fan.
I opted to make a custom cover for the PSU with some thin gauge perforated metal from the big box store. Just cut out the size i need with tin snips and used a metal ruler to bend the sides over to make a pan the slips on top of the PSU.
Print Settings
- Printer brand:
Creality
- Printer:
CR-10
- Rafts:No
- Supports:Yes
- Resolution:.2
- Infill:30%
- Filament brand:
n/a
- Filament color:
n/a
- Filament material:
PLA+
- Notes:
- 3 Walls
- Tree Supports
Using Cura v5.7.0 it fit on the build plate and printed fine.
Tags
License
CR-10 single 120mm fan with original feet
by ADWWOOD is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
猜你喜欢
联系我们
热门推荐
-
藏身载具：VKB战斗者装备2024-03-18 -
小红帽扭曲版动作角色3D模型2024-04-01 -
Genmitsu 65mm夹紧器连接到52mm适配器2024-04-08 -
Ecoflow PowerStream 140mm 风扇保护壳2024-04-12 -
通用型号机器人头部模型2024-05-05
最热下载
-
车身RC 1/10 全套2023-03-26 -
通用型1/10比例底盘 - DKS基础款2023-03-26 -
尼克公司仿生假手指V3.5.5版2023-03-26 -
拒绝的手势2024-04-19 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21
最新模型
-
一体打印活动关节熊猫和支架2025-07-25 -
任意立方体活动关节的一体打印外星人2025-07-19 -
龙珠孙悟空，无需支撑2025-07-19 -
用于加长杆的戴森配件支架2025-07-17 -
真实玩偶 / 镶有凸圆形玻璃参数的眼睛2025-07-15