CR-10 框架喷嘴标签

CR-10 Nozzle label for frame

2024-03-27 05:50:58

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Similar to my Makergear M2/M3 nozzle labels (https://www.thingiverse.com/thing:6455986), this is a design for my CR-10 V2. I took the idea for this from the Up/down labels that a few people have designed for the Ender 3 and CR-10 and other printers.
Labels make life easier.

There are labels for 0.2, 0.3, 0.4, 0.5, 0.6, 0.8, 1.0, and 1.2mm nozzles. The Text is big enough you cold carefully dip some contrasting paint into the text for a fancier label.

I clip the un-used labels at the back of my CR-10 V2 and only have the current nozzle size label at the front frame.