1/4英寸螺钉帽专用驱动器
1/4" Wingnut Socket Driver
2023-07-25 17:54:21
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Here is a 1/4" wingnut driver that uses 3/8" socket drive. It holds the wingnuts nicely so you can manipulate the drill without the nut falling out.
I had a job that required me to assemble a few hundred 5/16" wingnuts and made a driver for them. It worked very well and was liked here so I made this 1/4" version. You can find my 5/16" version here:
https://www.thingiverse.com/thing:6105604
I will be adding more sizes so keep an eye out for more them.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3
- Rafts:No
- Supports:No
- Resolution:0.2mm
- Infill:70
- Filament brand:
Generic
- Filament material:
PLA
Tags
License
CC BY
1/4" Wingnut Socket Driver
by PartierSP is licensed under the Creative Commons - Attribution license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
联系我们
邮箱: 289047960@qq.com
最新模型
-
SSR 衬套盖2024-05-08 -
创实 Ender-3s1 Y轴电机支架2024-05-08 -
埃及风格卡坦岛棋子2024-05-08 -
沃尔沃V50雨刷导管2024-05-06
最热下载
-
DOOM（2016）超级散弹枪（改进版并缩放）2023-03-26 -
FPV 模型：原型坦克配备炮塔2023-03-26 -
Toyota 22RE发动机扩展套件2023-03-26 -
替换式膨胀喷嘴，适用于FLEXTAILGEAR小型泵。2024-03-18 -
P90 AEG型号空气枪到Odin Airsoft速率加载器适配器2024-05-01