小型608轴承转盘模型

Mini 608 Bearing Turntable

2023-07-25 23:59:33

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I designed this mini turntable for painting my resin printed models and to fit on the small table of the Anycubic Mono 2 platform as it's tiny.

Use it for painting or for displaying.

I designed it to be easy to print with no supports, rotate it in your slicer so the main flat edges are on the bottom, I added chamfers to make it easier to use a spatula for removing.

Support posts were added to improve stability as 608 bearings have a bit of play in them.

I used a standard 608 bearing (as found in fidget spinners) with a press fit into the top and base, the tight fit needed a rubber mallet BUT the base required a dab of super-glue, or you could try resizing the base by -0.5 to -1.0% smaller, the super-glue worked a charm though.

I added some silicone feet to make the base more grippy on smooth surfaces, or you could add some hot-glue dots.

The finished table spins like a spinny thing! I accidentally found it spun by my airbrush air pressure which proved to be a bonus as it rotated as I sprayed.

The holes were added to make spinning it easier but it looks good when viewed from the side too.