硅胶袜子模具

Mold for a Silicone Sock for Dragon Hotend

2023-07-26 04:01:14

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

a three part mold to produce a silicone sock for the DRAGON Hotend (Heater-Block) with 3mm Wall Thickness

This mold can be used to cast silicone socks for a DRAGON hotend.
The wall thickness of 3mm provides better insulation and the sock fits verry well so it cant get loose during printing.

Only use heat resistant castable 2 component (RTV) silicone.
(example and Amazon - Link to the silicone i used: https://www.amazon.de/TFC-Kautschuk-Dubliersilikon-mittelhart-hitzebest%C3%A4ndig/dp/B01MZ7EO1V/ref=sr_1_23)
This silicone cannot be used in SLA/DLP made molds, it will not cure in it!

No release agent is required, the cured silicone can be easily detached from the plastic (PLA/PETG).

Print Settings

Supports:
Yes
Resolution:
0,2mm
Infill:
15%-20%
Filament brand:
any
Filament color:
as your choice
Filament material:
any
Notes:
Support is needed only for the lid, print it upside down.

Tags

dragon heat block hotend silicone mold silicone socks

License

CC BY-NC

Mold for a Silicone Sock for Dragon Hotend
by darwin-de is licensed under the Creative Commons - Attribution - Non-Commercial license.

硅胶袜子模具

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

Cyborg Beast
2023-03-26
安装电缆固定装置
2023-05-09
海洋之滴 Boargame 天文仪室
2024-03-21
刀之站立
2024-04-16
创业
2024-04-24

最热下载

最新模型