框架安装指导支撑件 | 2 个版本

Frame mounting guide spacer | 2 versions

2023-07-26 17:34:36

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Hang your pictures with the perfect spacing!

This mounting guide is designed to assist in hanging multiple pictures/frames on the wall, all spaced a perfect 2 inches apart. This will be easy to remix to whatever spacing you need!

Version 1 looks like a "+" and was my first design (and the only one I've actually printed)
Version 2 looks like a "T", and is likely a more versatile design; though I only conceived it after printing v1 for myself.
I printed with only 2 walls and about 5% infill (see GCODE); worked well

The slots are designed for inserted bubble levels (see photos). These holes are quite stiff, but if you work with them a bit, the bubble levels should snap in without breaking and be held in place very firmly.

For the 2-level version ("v1") shown in the photos, I used the two small levels taken from this cheap torpedo level from Harbor Freight. If you're ripping apart one of those levels specifically, any cylindrical bubble level measuring 8mm x 22mm will work.