创实科技 K1/K1 MAX 滚筒托盘

Creality K1/K1 MAX Spool Holder

2023-08-04 17:44:38

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Hi, I borrowed two fantastic designs from Hugo Groeneveld, https://www.thingiverse.com/thing:3020026, Mi Sch, https://www.printables.com/model/131300-spool-holder to create the ultimate spool holder for my K1 Max. It combines a really great stand for stability and awesome bearing rollers for great low friction unspooling.

You will also need 2 x 608 type bearings.

Updated: Added new model with K1 Max logo.

Updated: Added new model that supports 3kg rolls as requested.

Updated: Took inspiration from JPN_FI over at https://www.printables.com/model/659451-spool-stand-with-filament-guide and his remix of my spool holder and added a new modular design with 3 pieces. Base with base cap and ptfe tube arm. If you don't require the ptfe tube arm you can cap the top. If you require the arm, remove cap and install ptfe tube arm. This modular design allows printing on the smaller beds. Also added model with built in spool holder that doesn't roll as freely keeping the filament tighter preventing tangles. Hole is 4mm for ptfe tube, if you would like a fitting instead, you can drill it out and tap as required.