创实科技 Falcon2 风口适配器

Creality Falcon2 Vent Adaptor

2024-01-05 05:00:05

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A simple adaptor to allow the standard Falcon2 enclosure vent hose to exhaust through a organic fume filter, the type that usually twists on to a spray mask.

I modeled this to fit this Amazon item: One Pair 6003 Organic Vapor Replacement Cartridge Filter

Print Settings

Printer brand:
Creality
Printer:
HALOT ONE PRO
Rafts:
No
Supports:
Yes
Resolution:
0.05
Infill:
n/a
Filament brand:
generic
Filament color:
whatever
Filament material:
405nm resin
Notes:
I printed this with the filter part direct on to the build plate, then manually added some medium supports to the inside large flat plane.

I'd expect this to print OK on an FDM printer, the walls are 2mm. you may want to add supports unless your printer is fantastic at bridging.

How I Designed This

unnecessary and boring info about the design

I decided to try and trace a photo in Fusion to get the profile for the vent adaptor. getting the image on to a canvas and scaled was simple enough. getting a spline to actually follow the outline wasn't so easy.

I used the dimensions from the in box fan adaptor to profile the hose connector, but to speed up my print I shortened it to just 20mm from the 40mm the original was. I have no regrets about this decision, it allowed me to print the model before I went to bed.

having drawn the profile sketches and extruded some bits I used Shell to remove the end faces and create the bulk of the model. probably pretty normal stuff but I'd not used Shell like that before, so I had a small moment of joy when it worked as I'd hoped.

After adding a few fillets to make it pretty I realised it needed some clearance to the filter didn't get pressed against the internal face and restrict the air flow, so a quick offset on the sketch and a small extrude and the model is now complete.