四孔炮塔3D模型

Lee 4 hole Turret

2023-08-04 21:44:00

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

May need some slight sanding/trimming on the lugs to fit your particular turret housing.
Would not recommend use for sizing rifle cases where a stuck case is a possibility.

Due to the software used you will need to reduce scale dimensions to 10%.

No supports needed.
Recommend 2.2mm walls & 1mm top/bottom.
Recommend PETG or PLA+ for strength.
Dies thread in tight.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 v2
Rafts:
No
Supports:
No
Infill:
50
Notes:
Reduce scale to 10%.
This is due to the software used not playing nicely with curves at small dimensions.