行星减速器示例模型

Planetary Gearbox example - model fidget toy

2023-08-05 05:30:49

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I designed this for my son as a bit of an educational, interactive toy.

I've designed it with pretty lose tollerences, as I was thinking of little heavy handed hands, also so it'd be easier to turn. Although I did print the planetary gears at 98%, just for extra wiggle room. This will of course depend on your printer and settings.

The handle is split into parts, to avoid using supports but you may need some where the second 'handle holder' seats. Again this depends on your printer.

The brass inserts are for M3 bolts and the bolts were M3 countersunk.

After desgining and printing, I realised when tipped around the gears could fall out, if not paying attention, when my son had it in hand. So I designed the 'outter' which fits via friction and just covers a slight section of the ring gear, stopping the planets falling out.

Any questions, send them over and it'd be cool to see any prints.

Note:
The model in the images was printed in Silk PLA, with a 0.4 nozzle other than the ring gear an doutter section, which I used a 0.8 in order to reduce the print time. All were printed with a 0.2 layer height. The gears were printed with 4 vertical walls.

Print Settings

Printer brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.2
Infill:
15
Filament brand:
Eryone
Filament color:
multiple
Filament material:
Silk PLA although PETG would suit well.
Notes:
Note:
The model in the images was printed in Silk PLA, with a 0.4 nozzle other than the ring gear an doutter section, which I used a 0.8 in order to reduce the print time. All were printed with a 0.2 layer height. The gears were printed with 4 vertical walls.